The Ghost Immobiliser
Immobilisers can be an effective weapon in the fight against car theft. They prevent the car from starting if it isn't equipped with an identification card. They also help to stop hotwiring or other traditional methods of vehicle theft. Modern methods such as key cloning and relay theft are becoming more common.
The Ghost Immobiliser has been designed to counter these new trends and make your car undetectable. It is silent and stealthy and does not use key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser is an innovative device that connects to the CAN data network in your vehicle to prevent key cloning and theft. It is a TASSA-approved device and insurance companies also endorse it. It operates quietly and is virtually undetectable to thieves. It makes use of buttons on your steering wheel and centre console to create an individual pin-code sequence you must enter before you can start the vehicle. You can create up to 20 different sequences to increase security. The system is simple to install and doesn't require any additional hardware.
To ensure the highest quality results it is recommended you use a reputable CAN-immobiliser installer who specializes in your particular vehicle. Idealy, they should have a workshop close to you that you can visit to have your installation completed. They will also have a variety tools and equipment to aid you in the process of installing. These include hand tools, a multimeter and insulation tape as well as heat shrink tubing to secure connections. A user's manual will give you instructions for your vehicle's wiring.
Before beginning the installation, disconnect the battery to avoid short circuits and airbag deployment. Double-checking the CAN L and CAN H wires is vital because a mistake in identification could cause a misalignment of the system. It is recommended to mark the wires using tiny pieces of tape or mark them. Additionally, you can make use of a multimeter to confirm that the power source you have identified has a reliable 12V supply.
Advanced thieves may employ various methods to evade Ghost Immobilisers, including blocking or spoofing. These methods are based on amplifying the signal sent from your key fob to the electronic control unit of your vehicle. With advanced anti-jamming techniques and a constant monitoring system, your vehicle can be protected from these sophisticated attacks.
Increased security
A ghost immobiliser provides an extra layer to protect your car against theft. It works with a PIN code security system that can be activated by pressing buttons on the steering wheel or on your dashboard, making it difficult for thieves to gain access to the device and steal your vehicle. The device is also designed to be hidden in the vehicle, and is devoid of any other lights or signals that would alert a potential thief to its presence. It communicates directly with the ECU of your car through the data bus. This means that it is not vulnerable to hacking or relay attacks.
This system is a great investment for those who own high-end vehicles, as they are at a higher chance of theft due to their worth and their popularity. Its enhanced features protect your car from key duplicates and ECU swapping. Ghost immobilisers can be connected to an app, so that you can easily arm and dearm them. They can include a service/valet setting that lets you temporarily disable the immobiliser during repairs or maintenance.
Another benefit of ghost immobilisers is that it doesn't require wire cutting. This is an excellent feature, especially if the car is newer and does not include an immobiliser. Certain systems might also be able to integrate with the GPS tracking device, which can provide additional security for your vehicle. The use of a GPS tracker may also aid in reducing your insurance premiums. If you decide to purchase a ghost immobiliser make sure it is TASSA-certified and that an expert installer installs the device for you.
Compatible with all major models and brands
The Ghost Immobiliser was designed to work with all major models and makes, protecting your prized possessions from theft. It creates a unique pin code using buttons on your steering wheel, console or door panels. You must enter this code before you are able to drive. The system is tamper-proof, undetectable, and is covered by a three-year warranty. It is also fully endorsed by insurance companies This means that it could help reduce your premiums.
Unlike standard immobilisers, which make use of your key fob to control the ignition and ignition, the Ghost system operates by directly connecting to the engine controller unit through the CAN data bus. It is virtually impossible to remove, disable or hack. The Ghost system can also be linked to an iPhone app to allow remote monitoring and management.
You can create an PIN that is simple to remember, yet mathematically, it is impossible to guess for thieves. You can modify and modify the PIN at any time to ensure your vehicle's security, even if it is located in a parking lot or on the street. You can also select a valet or service mode in the event that someone else requires your vehicle temporarily or when it is in the garage. This is an excellent way to protect your car from being stolen by an unscrupulous mechanic. To ensure your security, you can opt for a Ghost call alert to inform you when your car is moving or it has been moved.
Convenience
The ghost immobiliser shields your vehicle from common theft techniques like key cloning or relay attacks. It connects to the vehicle's CAN data network and blocking communication with the engine ECU. ghost vehicle immobiliser makes it difficult for thieves to clone or hack your vehicle, which makes the installation of this system a smart idea for any driver.
After installation, you'll be required to enter a PIN code up to 20 digits long using the buttons on your dashboard and steering wheel to begin the engine. The system is completely hidden, and therefore undetectable by thieves. It doesn't emit radio frequency signals. It can be set up using an PIN code that can be changed by the user, adding to its security. The system is also designed to stop circuit cutting and makes it virtually impossible to tamper with.
If you have a problem remembering your PIN, there are systems that let you communicate with the immobiliser using an app on your smartphone, disarming it instantly. Some even come with a service/valet mode that allows you to start your car temporarily, like when you need to drop it off for maintenance or valet parking.
The Ghost Immobiliser is also unnoticeable to thieves as it doesn't transmit radio signals, which is a significant advantage over other aftermarket car security systems. It is also easy to use and doesn't require any complicated wiring. It can also be used in conjunction with a dash camera for additional security. Dash cam Thinkware F70 features clear and sharp 1080p HD footage, Format Free Technology, and parking mode. The system can also be hardwired to ensure optimal performance and longevity.
Installation
It is essential to select the most reliable immobiliser ghost in order to safeguard your vehicle from thieves. This device can stop car thefts by blocking the communication between key fobs and the engine controller unit. This prevents thieves from intercepting the signal and copying the key fob to begin your car. It can also detect the presence of a tamper and alert the vehicle owner.
The device is easy to install and can be integrated with the vehicle's existing systems. It requires no modification to the wiring of your vehicle and can be hidden in a hidden area, like under the dashboard. To ensure that the device has been properly installed, follow the instructions in the user's manual. It is also crucial to test the system following installing it. This will ensure that the immobiliser ghost works exactly as it was intended to.
You can purchase an Autowatch Ghost 2 Immobiliser from a certified installer and have it installed in your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it harder for thieves to steal the system or bypass it. The installation process generally takes between 2 and 3 hours.
When installing the Ghost it is recommended that you review the wiring diagram of your vehicle model. This will help you identify the CAN High and CAN Low wires required to connect the Ghost to your vehicle's engine. It is also crucial to verify the connections to ensure that they are secure and insulated.
Once the installation has been completed, you are able to start using the Ghost Immobiliser as normal. It will turn off the ignition of your vehicle in the event that it is not started using the correct PIN, which you can assign yourself. The immobiliser ghost can be set to Service/Valet Mode if you need your vehicle cleaned or valet parking.